Koneksi internet dengan modem Smartfren AC2726i di Archlinux

[zxvbm]

Catatan ini ane tulis awal taun 2012, waktu ane nyoba archlinux-2011.08.19-core-dual.iso

Koneksi internet dengan modem Smartfren AC2726i di Archlinux

Paket-paket software sama dependensi yang dibutuhkan, antara lain:
wvstreams, xplc, wvdial, usb_modeswitch, tcl

Semua paket tersebut bisa didownload di bawah ini:

1) archlinux.org -- mirror: mirrors.kernel.org
usb_modeswitch
tcl
wvdial
wvstream
xplc

2) pkgs.org -- mirror: ftp5.gwdg.de
usb_modeswitch
tcl
wvdial
wvstream
xplc


Pada saat modem USB dicolokkan, Archlinux udah langsung mengenali modem USB.
Gunakan perintah lsusb untuk melihat hasilnya.

[root@archer ~]# lsusb

Spoiler

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 001 Device 003: ID 19d2:fff5 ONDA Communication S.p.A.
[root@archer ~]#

Device modem USB yang dikenali adalah "Bus 001 Device 003: ID 19d2:fff5 ONDA Communication S.p.A.".
Selanjutnya kita perlu mengubah dari mode storage ke mode modem dengan menggunakan usb_modeswitch.
Langkah pertama adalah instalasi usb_modeswitch beserta dependensinya.

[root@archer ~]# pacman –U usb_modeswitch-1.2.2-1-i686.pkg.tar.xz tcl-8.5.11-1-i686.pkg.tar.xz

Tunggu hingga proses instalasi selesai.
Lalu gunakan kembali perintah lsusb.

[root@archer ~]# lsusb

Spoiler

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 001 Device 004: ID 19d2:fff1 ONDA Communication S.p.A.
[root@archer ~]#

Jika berhasil, pada baris terakhir akan berubah menjadi fff1 bukan fff5, kalo belum tunggu beberapa saat lalu ulangi perintah lsusb. Selanjutnya instalasi wvdial beserta dependensinya.

[root@archer ~]# pacman –U wvdial-1.61-3-i686.pkg.tar.xz wvstreams-4.6.1-3-i686.pkg.tar.xz xplc-0.3.13-3-i686.pkg.tar.xz

Tunggu sampe proses instalasi selesai.
Kemudian jalankan perintah wvdialconf, untuk konfigurasi wvdial.

[root@archer ~]# wvdialconf

Spoiler

Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan: S0 S1 S2 S3
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: QUALCOMM INCORPORATED
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB3<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyUSB4<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB4<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB4<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Found a modem on /dev/ttyUSB0.
/etc/wvdial.conf<Warn>: Can't open '/etc/wvdial.conf' for reading: No such file or directory
/etc/wvdial.conf<Warn>: ...starting with blank configuration.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 9600; init &quot;ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0&quot;

Untuk melihat hasil konfigurasinya:

[root@archer ~]# cat /etc/wvdial.conf

Spoiler

[Dialer Defaults]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
; Phone = <Target Phone Number>
ISDN = 0
; Username = <Your Login Name>
Init1 = ATZ
; Password = <Your Password>
Modem = /dev/ttyUSB0
Baud = 9600
[root@archer ~]#

Lalu ubah sesuai dengan konfigurasi modem Smart:

[root@archer ~]# nano /etc/wvdial.conf

Spoiler

[Dialer smart]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Phone = #777
ISDN = 0
Username = smart
Init1 = ATZ
Password = smart
Modem = /dev/ttyUSB0
Baud = 9600
FlowControl = CRTSCTS
Carrier Check = No
New PPPD = yes
[root@archer ~]#

Untuk mengaktifkan koneksi ke Internet, lakukan dengan perintah berikut:

[root@archer ~]# wvdial smart

Spoiler

--> WvDial: Internet dialer version 1.61.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Waiting for prompt.
~[7f]}#@!}!}!} }3}&quot;}&} } } } }#}%B#}’}”}(}”w}0~
--> PPP negotiation detected.
--> Starting pppd at Wed Feb 15 23:25:06 2012
--> Pid of pppd: 922
--> Using interface ppp0
--> pppd: H■■ P■■
--> pppd: H■■ P■■
--> pppd: H■■ P■■
--> pppd: H■■ P■■
--> pppd: H■■ P■■
--> local IP address 10.116.139.61
--> pppd: H■■ P■■
--> remote IP address 10.17.95.21
--> pppd: H■■ P■■
--> primary DNS address 10.17.3.244
--> pppd: H■■ P■■
--> secondary DNS address 10.17.3.245
--> pppd: H■■ P■■

Tes koneksi, misal ke www.google.com.

[root@archer ~]# ping -c 5 www.google.com

Spoiler

PING www.google.com (74.125.235.19) 56(84) bytes of data.
64 bytes from sin01s04-in-f19.1e100.net (74.125.235.19): icmp_seq=1 ttl=53 time=79.4 ms
64 bytes from sin01s04-in-f19.1e100.net (74.125.235.19): icmp_seq=2 ttl=53 time=91.6 ms
64 bytes from sin01s04-in-f19.1e100.net (74.125.235.19): icmp_seq=3 ttl=53 time=86.5 ms
64 bytes from sin01s04-in-f19.1e100.net (74.125.235.19): icmp_seq=4 ttl=53 time=84.4 ms
64 bytes from sin01s04-in-f19.1e100.net (74.125.235.19): icmp_seq=5 ttl=53 time=79.3 ms

--- www.google.com ping statistics ---

5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 79.368/84.289/91.693/4.656 ms
[root@archer ~]#

Selesai.

Untuk selanjutnya, sebelum internetan, aktifin dulu wvdial-nya dengan perintah wvdial smart dari terminal.

[admin]

wah ... wawh ... ada forumker yang jago IT

Selamat datang oom pakar IT

[zxvbm]

Originally Posted by admin

wah ... wawh ... ada forumker yang jago IT

Selamat datang oom pakar IT

yakinlah suwer, ane ga jago IT, apalagi pakar IT cuma sering aja.
itu temen ane yg ngajairin om

[setan]

Siap meramaikan forumku.com
Ayo Min, semangat ngembangin forum ini.
Yang lain mohon membantu untuk menambahkan forumku.com di ;
1. Google Add Url
2. Share Facebook
3. Share Twitter
4. Add to Blog
5. Promosi di kaskus